The Twin SECO N 25 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications.
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
S12 – Internal, intelligent load dependent cut-off switch.
Z-Version: Programmable feedback limit position „OPEN“ and „CLOSE“ (max. 24 V, 500 mA)
Master:
· KS2 xxx S12 230V AC R / L with voltage output 24V DC
Slave:
· KS2 xxx S12 24V DC R / L with connection cable on motor side
· KS2 xxx S12 24V DC L-K with connection cable on chain side
S12 – Integrated, intelligent load dependent cut-off switch.
Application: Natural Ventilation
Z-Version: Programmable feedback limit position „OPEN“ and „CLOSE“ (max. 24 V, 500 mA)
230 Volt AC, Stroke 200-800mm.
Right and left hand version available.
Integrated, intelligent load dependent cut-off switch.
Application: Natural Ventilation
Z-Version: Programmable feedback limit position „OPEN“ and „CLOSE“ (max. 24 V, 500 mA)
24 Volt DC, Stroke 200-800mm.
Right and left hand version available.
Integrated, intelligent load dependent cut-off switch.
Due to a force of 250N and a compact drive size – which allows a profile integrated mounting – KS2 chain actuators are optimally suited for reliable opening and closing of windows.
Rated voltage – 24V DC / 0,7A / 230V AC / 0,13A
Cut-off switch
S2 – Internal load dependent cut-off switch
S12 – Intelligent cut-off switch (programmable functions)
Pulling/Pushing force max. 250 N
Stroke100 – 800 mm – (S12 programmable)
Speed5 – 14 mm/s – (S12 programmable)
Housing (W x H x L)42 x 26 mm, length depending on stroke
Opening mechanism – Rigid backed stainless steel side bow roller chain
Versions – R (right), L (left), TWIN, Z, Set 230V/24V
Protection rating – IP 32
Certification – NSHEV compliant with EN 12101-2
Due to a force of 250N and a compact drive size – which allows a profile integrated mounting – KS2 chain actuators are optimally suited for reliable opening and closing of windows.
Rated voltage – 24V DC / 0,7A / 230V AC / 0,13A
Cut-off switch
S2 – Internal load dependent cut-off switch
S12 – Intelligent cut-off switch (programmable functions)
Pulling/Pushing force max. 250 N
Stroke100 – 800 mm – (S12 programmable)
Speed5 – 14 mm/s – (S12 programmable)
Housing (W x H x L)42 x 26 mm, length depending on stroke
Opening mechanism – Rigid backed stainless steel side bow roller chain
Versions – R (right), L (left), TWIN, Z, Set 230V/24V
Protection rating – IP 32
Certification – NSHEV compliant with EN 12101-2
Chain actuator 230V AC
Technical specifications | |
---|---|
Chain opening | Depending on variant – see product sheet |
Opening speed | Depending on variant – see product sheet |
Chain stroke | See product sheet |
Opening / closing speed | 8mm/s |
Pressure force | 500N – see pressure/traction force diagram on the product sheet |
Tractive force | 300N |
Primary voltage | 230VAC, ±10%, 50/60Hz, 50VA |
Current consumption | 0.45 A |
Size | 42 x 57 x 605 mm (H x D x L)/( L= 605 + 18 = 623 mm incl. screws) |
Colour | Anodized aluminium |
Chain actuator 230V AC
Technical specifications | |
---|---|
Chain opening | Depending on variant – see product sheet |
Opening speed | Depending on variant – see product sheet |
Chain stroke | See product sheet |
Opening / closing speed | 4mm/s |
Pressure force | 800N – see pressure/traction force diagram on the product sheet |
Tractive force | 500N |
Primary voltage | 230VAC, ±10%, 50/60Hz, 50VA |
Starting current | 6A<1mSec |
Size | 54 x 80 mm (HxD), length – see product sheet |
Colour | Anodized aluminium |
Chain actuator
Programmable 24V DC chain actuator for surface mounting for smoke and comfort ventilation.
Description
Technical specifications | |
---|---|
Chain opening | 50 – 1000mm in increments of 10mm |
Opening speed | 1-17 mm/s (TrueSpeed™) |
Pressure force | dependent on chain length – see the table on the product sheet |
Tractive force | dependent on chain length – see the table on the product sheet |
Voltage | nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 1A |
Size | 25 x 37mm (H x D), length (L) depending on chain stroke |
Colour | Anodized natural aluminium, white RAL 9010 and anodized black. RAL colours available at an additional price |
To be ordered separately | Brackets and standard extension cables type WLL |
Due to a force of 400 N in a very compact housing of just 35 x 24 mm (W x H), KS4 chain drives are currently the most powerful NSHEV drives of this class in the international market.
The new and unique, on both sides mounted connector solution allow a series connection of up to three drives and a locking drive. The direct mounting without consoles as well as the M-COM for self-learning configuration in multi-drive systems greatly simplify the installation.
The integrated microprocessor can communicate via data bus with intelligent control systems. In the context of modern façade automation systems, different situational speeds and forces can thus be driven.
KSA chain drives from AUMÜLLER are manufactured with forces of 600 N and 1200 N. Due to the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in façades and roofs.
The SECO N 25 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications.
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
The Twin SECO N 24 25 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications.
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
The SECO N 24 25 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications.
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
The SECO Ni 24 40 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Smoke and Environmental Ventilation applications.
• Tested to all annexes of EN12101-2: 2003
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
• 900mm version is not suitable for Top Hung applications
The Twin SECO Ni 24 40 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Smoke and Environmental Ventilation applications.
The SECO Ni 40 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications.
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
The Twin SECO NI 40 is a high quality actuator made by SE Controls in the UK. The Twin SECO Ni 40 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications. This actuator comprises the following features:
• ‘Frequency of operation’ data logging records every actuator movement
• Compact design with variable options for stroke length
• Standard finish is Grey RAL 9006, can be customised to suit requirements
• Standard flex length is 2m but this can be modified to suit installation requirements
• Extensive range of brackets to suit a variety of window systems
• Quiet operation with configurable speed control
KSA chain drives from AUMÜLLER are manufactured with forces of 600 N and 1200 N. Due to the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in façades and roofs.
Chain actuator
Programmable 24V DC chain actuator for concealed installation for smoke and comfort ventilation.
Description
Technical specifications | |
---|---|
Chain opening | 50 – 1000mm in increments of 10mm |
Opening speed | 1-17 mm/s (TrueSpeed™) |
Pressure force | dependent on chain length – see the table on the product sheet |
Tractive force | dependent on chain length – see the table on the product sheet |
Voltage: | nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 1A |
Size | 22 x 33mm ( H x D), length (L) depending on chain stroke |
Colour | Black anodized aluminium, black RAL 9005. RAL colours available at additional price |
Chain actuator 500N 1A
The actuator is a high-performance, medium chain actuator specially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec.
– The TrueSpeed™ feature enables an opening of 1 mm per second, can control several motor lines simultaneously and ensure higher degree of control
Technical specifications | |
---|---|
Chain stroke | 400mm |
Opening speed | 7-12mm/s |
Pressure force | see item table and pressure/traction force diagram on the product sheet |
Tractive force | 500N |
Primary voltage | 24 VDC, max. 10% ripple |
Current consumption | 1A |
Size | 42 x 57 x 605 mm (H x D x L)/( L= 605 + 18 = 623 mm incl. screws) |
Colour | Aluminium RAL 9006 |
Chain actuator 300N
Programmable 24 Volt DC chain actuator for surface mounting for smoke and comfort ventilation.
For top hung, bottom hung, pivot and turning windows.
The actuator can be used together with espagnolette WMB.
The actuator is approved according to EN 12101-2 with selected profiles – please contact Blue Squared for further information
The electronics in this actuator can be programmed to suit specific requirements – i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100 programming box, also possible following installation.
Actuator and chain brackets to be ordered separately.
Technical specifications | |
---|---|
Chain stroke | See item table |
Opening speed | 11mm/s |
Pressure force | max. 300N – see item table and pressure/traction force diagram on the product sheet |
Tractive force | 300N |
Primary voltage | 24 VDC, max. 10% ripple |
Current consumption | 1A |
Size | 34 x 47mm (HxD), lenght- see item table |
Colour | Anodized aluminium |
Chain actuator 1000N 3A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – please contact Blue Squared for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Technical specifications | |
---|---|
Chain opening | Depending on variant – see product sheet |
Opening speed | Depending on variant – see product sheet |
Pressure force | Max. 1000N |
Tractive force | Max. 1000N (programmable 300-1000N) |
Voltage | Nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 3A |
Size | 80 x 54mm (HxB): Lenght depending on variant – see product sheet |
Colour | Anodized aluminium (EV1) RAL colours at an additional price |
Chain actuator 600N 3A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101 2 with selected profiles – please contact Blue Squared for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Chain actuator
Programmable 24VDC chain actuator for surface mounting for smoke and comfort ventilation.
Not appropriate with roof windows.
The electronics in this actuator can be programmed to suit specific requirements – i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100 programming box, also possible following installation.
Brackets to be ordered separately.
Technical specifications | |
---|---|
Chain opening: | 50 – 250mm in increments of 10mm |
Opening speed: | 7mm/s |
Pressure force | Max. 150N – dependent on the chain length – see the table on the product sheet |
Tractive force | Max. 200N |
Operating voltage | 24 VDC (max. 10% ripple) |
Current consumption | 1A |
Size | 332 x 29 x 42mm (WxHxD) |
Colour | Aluminium (RAL 9006), white (RAL 9010) or black (RAL 9005) |
Chain actuator 600N 2A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – please contact Blue Squared for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Chain actuator 1000N 2A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – please Blue Squared Pty for more information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Chain actuator 200N
Programmable 24V DC chain actuator for surface mounting for smoke and comfort ventilation.
To be used with top hung, bottom hung and turning windows.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– External safety edge can be connected directly to the actuator (actuator version ’E’)
– Synchronization of up to four window actuators – no need for an external
synchronization module
– Genuine position feedback and three speeds when using control unit with MotorLink®
– Soft close
– The electronics in this actuator can be programmed to suit specific requirements
– i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100
programming box, also possible following installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life span of
the window gaskets
– Easy mounting
This chain actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – Please contact Blue Squared Pty for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Programmable 24V DC chain actuator for concealed installation for smoke and comfort ventilation.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– External safety edge can be connected directly to the actuator (actuator version ’E’)
– Synchronization of up to four window actuators – no need for an external
synchronization module
– Genuine position feedback and three speeds when using control unit with MotorLink®
– Soft close
– The electronics in this actuator can be programmed to suit specific requirements
– i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100
programming box, also possible following installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life span of
the window gaskets
– Easy mounting
Chain actuator 1000N 4A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – please contact Blue Squared for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Technical specification | |
---|---|
Chain opening | Depending on variant – see product sheet |
Opening speed | Depending on variant – see product sheet |
Pressure force | Max. 1000N |
Tractive force | Max. 1000N (programmable 300-1000N) |
Voltage | Nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 4A |
Size | 80 x 54mm (HxB): Lenght depending on variant – see product sheet |
Colour | Anodized aluminium (EV1) RAL colours at an additional price |
Chain actuator
Programmable 24V DC chain actuator for concealed installation for comfort ventilation.
To be used with top hung, bottom hung and turning windows.
Not appropriate with roof windows.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– External safety edge can be connected directly to the actuator (actuator version ’E’)
– Synchronization of up to four window actuators – no need for an external
synchronization module
– Genuine position feedback and three speeds when using control unit with MotorLink®
– Soft close
– The electronics in this actuator can be programmed to suit specific requirements
– i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100
programming box, also possible following installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life span of
the window gaskets
– Easy mounting
Technical specifications | |
---|---|
Chain opening | 50 – 500mm in increments of 10mm |
Opening speed | 7mm/s |
Pressure force | dependent on chain length – see the table on the product sheet |
Tractive force | 150N |
Voltage | nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 0.5A |
Size | 517 x 30.5 x 42mm (W x H x D) |
Colour | aluminium (RAL 9006) |
Chain actuator 300N 1A
The actuator is a high-performance, medium chain actuator specially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec.
– The TrueSpeed™ feature enables an opening of 1 mm per second, can control several motor lines simultaneously and ensure higher degree of control
Technical specifications | |
---|---|
Chain stroke | 400, 500 and 600mm |
Opening speed | 7-12mm/s |
Pressure force | see item table and pressure/traction force diagram on the product sheet |
Tractive force | 300N |
Primary voltage | 24 VDC, max. 10% ripple |
Current consumption | 1A |
Size | 42 x 57 x 605 mm (H x D x L)/( L= 605 + 18 = 623 mm incl. screws) |
Colour | Aluminium RAL 9006 |
Chain actuator 500N 2A
The actuator is a high-performance, medium chain actuator specially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec.
– The TrueSpeed™ feature enables an opening of 1 mm per second, can control several motor lines simultaneously and ensure higher degree of control
Technical specifications | |
---|---|
Chain stroke | 400, 500 and 600mm |
Opening speed | 7-12mm/s |
Pressure force | see item table and pressure/traction force diagram on the product sheet |
Tractive force | 500N |
Primary voltage | 24 VDC, max. 10% ripple |
Current consumption | 2A |
Size | 42 x 57 x 605 mm (H x D x L)/( L= 605 + 18 = 623 mm incl. screws) |
Colour | Aluminium RAL 9006 |
Chain actuator 1500N 5A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – please contact Blue Squared for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Technical specifications | |
---|---|
Chain opening | Depending on variant – see product sheet |
Opening speed | Depending on variant – see product sheet |
Pressure force | Max. 1000N |
Tractive force | Max. 1500N (programmable 300-1500N) |
Voltage | Nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 5A |
Size | 80 x 54mm (HxB). Lenght depending on variant – see product sheet |
Colour | Anodized aluminium (EV1) RAL colours at an additional price |
Chain actuator 400N 2A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Technical specifications | |
---|---|
Chain opening | 750mm |
Opening speed | 750mm in 60 sec. |
Pressure force | 400N |
Tractive force | 500N |
Voltage | nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 2A |
Size | 80 x 54 x 765mm (HxBxL) |
Colour | anodized aluminium (EV1) RAL colours at an additional price |
Chain actuator
Programmable 24VDC chain actuator – current consumption 0.5A – for concealed installation in window profiles for comfort ventilation.
Not appropriate with roof windows.
The electronics in this actuator can be programmed to suit specific requirements – i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100 programming box, also possible following installation.
Chain brackets to be ordered seperately.
Technical specifications | |
---|---|
Stroke | 50 – 250mm, i spring af 10mm |
Chain opening | 10 – 250mm, in increments of 10mm |
Opening speed | 7mm/s |
Pressure force | Max. 150N – dependent on the chain length – see the table on the product sheet |
Tractive force | 150N |
Operating voltage: | 24 VDC (max. 10% ripple) |
Current consumption | 0.5A |
Size | 342 x 30 x 42mm (WxHxD) |
Colour | Grey (RAL 9006) |
Chain actuator
Programmable 24VDC chain actuator for concealed installation in window profiles for comfort ventilation.
Not appropriate with roof windows.
The electronics in this actuator can be programmed to suit specific requirements – i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100 programming box, also possible following installation.
Chain brackets to be ordered seperately.
Technical specifications | |
---|---|
Chain opening | 50 – 250mm, in increments of 10mm |
Opening speed: | 7mm/s |
Pressure force: | Max. 150N – dependent on the chain length – see the table on the product sheet |
Tractive force | 200N |
Operating voltage | 24 VDC (max. 10% ripple) |
Current consumption | 1A |
Size | 342 x 30 x 42mm (WxHxD) |
Colour | Grey (RAL 9006) |
Chain actuator 1000N 5A
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 with selected profiles – please contact Blue Squared for further information.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– Synchronization of up to 4 window actuators – no need for an external
synchronization module
– Genuine position feedback and 3 speeds when using control unit with
MotorLink®
– Soft close function
– The electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– Easy mounting
Technical specifications | |
---|---|
Chain opening | Depending on variant – see product sheet |
Opening speed | Depending on variant – see product sheet |
Pressure force | Max. 1000N |
Tractive force | Max. 1000N (programmable 300-1000N) |
Voltage | Nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 5A |
Size | 80 x 54mm (HxB). Lenght depending on variant – see product sheet |
Chain actuator 150N
Programmable 24V DC chain actuator for surface mounting for comfort ventilation. To be used with top hung, bottom hung and turning windows.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– External safety edge can be connected directly to the actuator (actuator version ’E’)
– Synchronization of up to four window actuators – no need for an external
synchronization module
– Genuine position feedback and three speeds when using control unit with MotorLink®
– Soft close
– The electronics in this actuator can be programmed to suit specific requirements
– i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100
programming box, also possible following installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life span of
the window gaskets
– Easy mounting
Technical specifications | |
---|---|
Chain opening | 50 – 500mm in increments of 10mm |
Opening speed | 7mm/s |
Pressure force | dependent on chain length – see the table on the product sheet |
Tractive force | 150N |
Voltage | nominal 24V DC 24V DC (max. 10% ripple) |
Current consumption | 0.5A |
Size | 487 x 30,5 x 42mm (WxHxD) |
Colour | aluminium (RAL 9006) or white (RAL 9010) |
To be ordered separately | brackets and extension cable (WLL cable) |
Chain actuator
Programmable 24VDC chain actuator – current consumption 0.5A – for surface mounting for comfort ventilation.
The electronics in this actuator can be programmed to suit specific requirements – i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100 programming box, also possible following installation.
Brackets to be ordered seperately.
Technical specifications | |
---|---|
Chain opening: | 50 – 250mm in increments of 10mm |
Opening speed: | 7mm/s |
Pressure force: | Max. 150N – dependent on the chain length – see the table on the product sheet |
Tractive force: | max. 150N |
Operating voltage: | 24 VDC (max. 10% ripple) |
Current consumption: | 0.5A |
Size: | 332 x 29 x 42mm (WxHxD) |
Colour: | Aluminium (RAL 9006) or white (RAL 9010) |
The actuator is a high performance actuator especially designed for large and heavy windows – an elegant alternative to spindle actuators.
Complete opening of the window within 60sec. (depending on the programming).
The actuator is approved according to EN 12101-2 please contact Blue Squared for more information.
Description
– to be used together with ±24V control units or control units with MotorLink®
– can be used together with espagnolette WMB
– synchronization of up to 4 window actuators – no need for an external
synchronization module
– genuine position feedback and 3 speeds when using control unit with
MotorLink®
– soft close function
– the electronics in this actuator can be programmed to suit specific
requirements – i.e. pressure- and traction force, stroke, speed/sound level –
with the WAT 100 programming box, this is also possible following
installation
– built-in electronic load switch-off/end stop
– electronic actuator with micro controller
– the actuator has an integrated reverse function to ensure a prolonged life
span of the window gaskets
– easy mounting