Chain Actuator WMX 526
Product Details
Chain actuator 150N
- ​Chain actuator for surface mounting.
- For comfort ventilation.
- For top hung, bottom hung and turning windows.
Programmable 24V DC chain actuator for surface mounting for comfort ventilation. To be used with top hung, bottom hung and turning windows.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– External safety edge can be connected directly to the actuator (actuator version ’E’)
– Synchronization of up to four window actuators – no need for an external
synchronization module
– Genuine position feedback and three speeds when using control unit with MotorLink®
– Soft close
– The electronics in this actuator can be programmed to suit specific requirements
– i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100
programming box, also possible following installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life span of
the window gaskets
– Easy mounting
| Technical specifications | |
|---|---|
| Chain opening | 50 – 500mm in increments of 10mm |
| Opening speed | 7mm/s |
| Pressure force | dependent on chain length – see the table on the product sheet |
| Tractive force | 150N |
| Voltage | nominal 24V DC 24V DC (max. 10% ripple) |
| Current consumption | 0.5A |
| Size | 487 x 30,5 x 42mm (WxHxD) |
| Colour | aluminium (RAL 9006) or white (RAL 9010) |
| To be ordered separately | brackets and extension cable (WLL cable) |
Product Inquiry Form
Chain Actuator WMX 526
Product Details
Chain actuator 150N
- ​Chain actuator for surface mounting.
- For comfort ventilation.
- For top hung, bottom hung and turning windows.
Programmable 24V DC chain actuator for surface mounting for comfort ventilation. To be used with top hung, bottom hung and turning windows.
Description
– To be used together with ±24V control units or control units with MotorLink®
– Can be used together with espagnolette WMB
– External safety edge can be connected directly to the actuator (actuator version ’E’)
– Synchronization of up to four window actuators – no need for an external
synchronization module
– Genuine position feedback and three speeds when using control unit with MotorLink®
– Soft close
– The electronics in this actuator can be programmed to suit specific requirements
– i.e. pressure- and traction force, stroke, speed/sound level – with the WAT 100
programming box, also possible following installation
– Built-in electronic load switch-off/end stop
– Electronic actuator with micro controller
– The actuator has an integrated reverse function to ensure a prolonged life span of
the window gaskets
– Easy mounting
| Technical specifications | |
|---|---|
| Chain opening | 50 – 500mm in increments of 10mm |
| Opening speed | 7mm/s |
| Pressure force | dependent on chain length – see the table on the product sheet |
| Tractive force | 150N |
| Voltage | nominal 24V DC 24V DC (max. 10% ripple) |
| Current consumption | 0.5A |
| Size | 487 x 30,5 x 42mm (WxHxD) |
| Colour | aluminium (RAL 9006) or white (RAL 9010) |
| To be ordered separately | brackets and extension cable (WLL cable) |