DHS Z-Wave Dimmer InWall

DHS Z-Wave Dimmer InWall

Please Contact Us for Pricing

Product Overview

The Z-Wave In-Wall Dimmer Controller is a wireless controller which can be a part of many whole-home automation solutions.

  • Control the ON/OFF function of your lighting appliances remotely or using a switch
  • Control the degree of illumination of your lighting appliances remotely or using a switch
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling

Product Details

The Z-Wave In-Wall Dimmer Controller is an advanced Z-Wave controller perfect for remotely operating your existing light fittings. It allows you to turn your lights ON or OFF and to adjust their level of illumination with a dimming interval of up to 1%. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The Z-Wave In-Wall Dimmer Controller is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

The controller is also compatible with many popular  BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera 3/Lite
  • Fibaro Home Center 2/Lite
  • DHS Z-Wave Universal Remote Controller
  • DHS Z-Wave Mini Remote Controller


Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers(Trailing Edge and Leading Edge)

CFL globes: Dimmable Philips Tornado CFL lamps and similar products.

LEDs: High performance, energy efficient Starburst LED downlight from Pierlite Australia and similar products.

This dimmer works very well with12W Dimmable LEDoffered by DHS.

Generic LEDs will NOT work with this product. If you are unsure please talk to your electrician first.


Please Note:

This product must be installed by a qualified electrician. 
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer’s warranty.
The neutral wire is not required for the dimmer to function. Using it will void the dimmer’s warranty.

Product Support


Z-Wave In-Wall Dimmer Manual (Size: 147KB)

Videos / YouTube:

Z-Wave In-Wall Dimmer

Fibaro Fibaro Home Center 2 Presentation

Technical Specifications

RF Protocol
ZWave(Multi-Level Command Class)
RF Frequency
921.42Mhz  AU/NZ  approved RF for Zwave
Z‐wave device type
Z-Wave multiple level dimmer, routing slave
AC 230/ 50Hz
Operation Range
Up to 30m indoor when no obstacles
Dimming Interval
1% with safety minimum set up at 25%
Dimmer Type
Universal, compatible with electronic transformers (Trailing Edge and Leading Edge).  Not compatible with iron core transformers.
Indoor use only
Operation temperature
0 ~ 55 °C
Max/Min Load
300W / 75W
Storage temperature
10 ~ 80 °C
AS/NZS 4268:2008, AS/NZS CISPR 15, IEC60669-2-1
Regulatory Compliance Mark
Load Compatibility
Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers Trailing Edge or Leading Edge type only.12W Dimmable LEDoffered by DHS.
(LxWxH) 45mm x 48mm x 18 mm


There are no reviews yet.

Be the first to review “DHS Z-Wave Dimmer InWall”

This site uses Akismet to reduce spam. Learn how your comment data is processed.