1300 851212 or 0421 582033

GOAP Z-Wave Tube Motor Control 12-24v DC

GOAP Z-Wave Tube Motor Control 12-24v DC

Please Contact Us for Pricing

Quick Overview

The GOAP Z-Wave Tubular Motor Controller DC is the world’s smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.

  • Z-Wave Plus certified
  • Supports the connection of a temperature sensor
  • Can measure the power consumption of connected device

Product Details

The GOAP Z-Wave Tubular Motor Controller DC is a Z-Wave Plus (500 series) controller for blind, roller and shade motors with 12-24V DC motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.

The GOAP Z-Wave Tubular Motor Controller DC allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.

This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;

  • Vera Edge/Plus
  • Fibaro Home Center 2/Lite

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device user manual. In most cases your device default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Product Support

Manuals:

Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)

Videos / YouTube:

GOAP Z-Wave Tubular Motor Controller

Technical Specifications

RF Protocol
ZWave Plus (500 series chip)
RF Frequency
921.42Mhz AU/NZ  approved RF for Zwave
Z‐Wave device type
Z-Wave binary switch, routing slave
Power
12-24V DC ± 10%
Rated Load Current 
2A
Overcurrent Protection
5A
Output circuit power of DC output (resistive load)
48W (24V DC)
Operation Range
Up to 30m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
10 ~ 40 °C
Storage temperature
10 ~ 60 °C
Weight
30g
Dimensions
41.8mm x 36.8mm x 16.9mm

Reviews

There are no reviews yet.

Be the first to review “GOAP Z-Wave Tube Motor Control 12-24v DC”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.