Description

Product Overview

The GOAP Double Switch is Z-Wave module for switching on or off one or two electrical devices (e.g. light, fan, etc …). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

Supported switches

Module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

Product Details
Compatible with any Z-Wave Controller.
Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
Power monitoring accuracy P=5-50W, +/-3W; 50W, +/-3%;
Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125°C
Support for the connection of digital temperature sensor (optional part)
2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc,
Product Support

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera™ user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device user manual. In most cases your device default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Strengthens Z-Wave Connectivity

The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.

The GOAP double switch is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our “What is Z-Wave Plus” guide for more information.

Note!

Do not connect the module to loads exceeding recommended values. Connect the module only in accordance to the  manual and diagrams below. Use only qualified electrician!

Manuals:

GOAP Z-Wave Double Switch Installation Manual

Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)

Videos / YouTube:

The smallest Z-Wave module

Technical Specifications
Product Name 
Z-Wave Dbl Switch
Powered by
24V DC or 240V AC
Operation Range
30m
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
-10 -+40 C*
Measured temperature range 0,5o C (within 0o C – 40o C range) (optional sensor)
Temperature measuring accuracy
0,5 C
Housing
ABS
Dimensions (W x H x D)
41.8 x 36.8 x 15.4 mm

Leave a Reply

Your email address will not be published. Required fields are marked *