Description

Quick Overview

The GOAP Flush Dimmer is the first MOSFET- switching light Z-Wave dimmer module that also supports control of low-voltage halogen lamps with electronic transformer, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor.

GOAP modules are install-and-forget products. Our products are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave micro-controllers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Product Details

All GOAP modules are manufactured in Europe.

  • The GOAP  Z-Wave Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.
  • The GOAP  Z-Wave Dimmer can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.
  • The GOAP  Z-Wave Dimmer can operate across a wide temperature range, from a chilly -10C to a scorching 40C . It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.
  • Unlimited controlling capability through gateway
  • Setting mono-stable (push button) or bi-stable switch type
  • Z-Wave Plus compliant
  • 23 additional parameters for expert users
Product Support

Please note: If you are installing the entire Z-Wave system for the first time, please refer to the installation guide of your Z-Wave gateway before installing this device.

The GOAP Flush Dimmer uses a unique MOSFET ‘trailing edge’ dimmer to enable it to work with a huge range of bulb types:

Halogen and Incandescent (230V)
Dimmable LEDs (230V)
Dimmable CFL and Fluorescent (230V)
Low Voltage Halogen (24V)
Low Voltage LED (24V)

The GOAP Dimmer can be used in the 230V mains lighting system where it uses a ‘Trailing Edge’ style dimmer to control the lights. It can also be used in a 24V low-voltage system where it uses PWM style control of the bulbs.

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera™ user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device user manual. In most cases, your device default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Please note:


These devices require a 3-wire system (including neutral), please check your installation before purchasing. If you have 2-wire system (without neutral) we recommend you use a DHS Z-Wave Dimmer InWallorFIBARO Z-Wave Dimmer 2

Manuals:

GOAP Z-Wave Dimmer InWall Installation Manual

Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)

Videos / YouTube:

The smallest Z-Wave module

GOAP Dimmer dimming a 24V DC LED Strip Lights

Technical Specifications
RF Protocol
Z-Wave Plus SDK version: 6.51.03
RF Frequency
921.42Mhz  AU/NZ  approved RF for Z wave
Application
Indoor use only
Power
0.6 A / 230 VAC
0.85 A / 30 VDC
Operation Range
Up to 30m indoors with no obstacles
Enclosure
Plastic
Comliance
EN 60669-2-1
Operating Temp.  -10C ~ +40C
Dimensions
41.8mm x 36.8mm x 15.4mm

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.