Description

Product Overview

Â

The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.

  • Easy to use and install
  • Supports low power lamps such as LEDs or energy saving compact fluorescent lamps
Product Details

The Fibaro Dimmer Bypass 2 is designed to supportFibaro Z-Wave In-Wall Dimmer 2by enabling it to control and dim lights which draw minimum 5W (e.g LED lighting).

It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA 

Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.

This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.

For warranty claim you have to provide an installation compliance certificate from your electrician.

Product Support

Manuals:

Fibaro Dimmer 2 Manual (Size: 633 KBRefer to chapter 3 page 7 for Fibaro Dimmer Bypass 2.

Fibaro System Overview (Size: 14.5 MB)

Videos / YouTube:

Technical Specifications
Application
Indoor use only
Operation temperature
0 ~ 35 °C
Power Consumption
less then 1.2W
Weight
35g
Power Supply
220 – 240 V ~ 50 Hz
Dimensions
(L x W x H) 31mm x 21.6mm x 13mm
Compliance
RoHS 2011/65/EULVD 2006/95/EU, EMC 2004/108

Leave a Reply

Your email address will not be published. Required fields are marked *