Description
- Industrial PLC logic driven system
- Duty fan and standby fan control
- Multiple fan speed control via industrial inverter enabling fire fighting and/or means of escape operational mode
- External fire fighters key switch control (auto/off, auto/boost)
- Simple hard wired activation or more involved network signal activation
- Multiple panels can be networked together creating highly specialised multiple fan operation for multiple shafts
- Reversible fan operation if required for twin shaft/triple shaft push/pull systems
- Pressure sensor monitoring to prevent excessive negative pressure in the activated zone
- Ability to utilise duty/standby fans as NV fans for day to day operation
- Ability to power additional single phase or three phase NV fans
- Ductwork damper(s) control
- System state indication on panel face via LED’s
- Activation/healthy vfc’s for BMS monitoring
- Fan panel status can be viewed via associated SHEVTEC repeater panel
| Technical specifications | |
|---|---|
| Dimensions | 30A (600X400X250) (WxDxH) 60A (600X600X250) (WxDxH) 90A (800X800X300) (WxDxH) |
| Mass Approx. | 30A (20KG) 60A (25KG) 90A (35KG) |
| Cable Entries | Cable entries are via up to 32 20mm cable glands |
| IP Rating | IP32 |
| Humidity Range | 10 to 90% Non-Condensing |
| Storage | – 20°C to 50°C |
| Operating Temp | – 5°C to 40°C |
