Fan Control Panel

The Variable Speed Fan Control Panel is a fixed modular design that is built and tested to provide a method of operating a single 415V three phase 50HZ duty/standby fan arrangement.

 

Categories: ,

Description

  • Industrial PLC logic driven system
  • Duty fan and standby fan control
  • Multiple fan speed control via industrial inverter enabling fire fighting and/or means of escape operational mode
  • External fire fighters key switch control (auto/off, auto/boost)
  • Simple hard wired activation or more involved network signal activation
  • Multiple panels can be networked together creating highly specialised multiple fan operation for multiple shafts
  • Reversible fan operation if required for twin shaft/triple shaft push/pull systems
  • Pressure sensor monitoring to prevent excessive negative pressure in the activated zone
  • Ability to utilise duty/standby fans as NV fans for day to day operation
  • Ability to power additional single phase or three phase NV fans
  • Ductwork damper(s) control
  • System state indication on panel face via LED’s
  • Activation/healthy vfc’s for BMS monitoring
  • Fan panel status can be viewed via associated SHEVTEC repeater panel
View Product Sheet
Technical specifications
Dimensions 30A (600X400X250) (WxDxH)
60A (600X600X250) (WxDxH)
90A (800X800X300) (WxDxH)
Mass Approx. 30A (20KG)
60A (25KG)
90A (35KG)
Cable Entries Cable entries are via up to 32 20mm cable glands
IP Rating IP32
Humidity Range 10 to 90% Non-Condensing
Storage – 20°C to 50°C
Operating Temp – 5°C to 40°C